Filter
Top Products
51
ENGLISH
REFERENCE:
• In the display of gamma correction, the horizontal axis indicates the brightness
level of the image that is recorded on the disc, and the vertical axis indicates the
brightness level of the image when it is output from this unit.
• When bright points of the disc side are adjusted to the “dark” of the output side,
the fine parts of the bright portion that normally become hard to see, become an
easily discerned image.
• When dark points of the disc side are adjusted to the “bright” of the output side,
the fine parts of the dark portion that normally become hard to see, become an
easily discerned image.
MEMORY 1
0
0
100
235
GO : 024
MEMORY 1
0
0
100
235
GO : 024
MEMORY 1
0
0
100
235
GO : 024
When the Display Position is Selected and Adjusted:
• Press the cursor button (ª), then select the
horizontal/vertical direction with the cursor
buttons (
0, 1), set the adjustment value with the
(•, ª) cursor buttons, and press the ENTER
button.
SETUP LEVEL (0 IRE, 7.5 IRE)
• This corrects floating black.
H. POSITION (–7 to +7) (Factory default: 0)
• A 15-step portion of position adjustment is
permitted left and right.
V. POSITION (–3 to +7) (Factory default: 0)
• A 11-step portion of position adjustment is
permitted up and down.
7
✽
To exit the picture adjust mode
Press the PIC.ADJ button.
Remote control unit
Remote control unit
ENTER
PICTURE MODE
STD M1 M2 M3 M4 M5 SET
PIC SETUP
SETUP LEVEL
7
3
0
STD(STANDARD)
M1(MEMORY1)
M2(MEMORY2)
M3(MEMORY3)
M4(MEMORY4)
M5(MEMORY5)
SET(PIC SETUP)
1(ADJUSTMENT 1)
2(ADJUSTMENT 2)
3(ADJUSTMENT 3)
GAMMA
CONTRAST
BRIGHTNESS
SHRPNESS(MID)
SHRPNESS(HI)
HUE
ENHANCER
BLACK LEVEL
WHITE LEVEL
CHROMA LEVEL
CHROMA DELAY
3DNR
BLNR
MQNR
CCS
G0~G9
SETUP LEVEL
H.POSITION
V.POSITION
PICTURE MODE
✽
Only effective for progressive scan.
✽
✽
✽
✽
✽