Filter
Top Products
QSD2014 User’s Manual
7
Note：If a channel is disabled in Channel Setup, DVR will not record or set frame rate.
5.4 Record Setup
5.5 Record Framerate
Press [▲，▼，◄◄ and ►►] buttons to select a channel, and then press [SEL] to increase the value or
press [■STOP] to reduce the value.
Note: Higher frame rate shows smoother video, but requires more hard-drive space.
5.6 Video Quality
The total frame rate is 50fps (PAL) or 60fps (NTSC).
You can set the frame rate for each channel to meet your
requirements up to the 50fps or 60fps limit.
Video Quality has 4 different settings, including:
Highest, High, Normal and Low.
The Higher the video quality, the better the quality
of Images, However higher quality images require
more hard drive space.
Press [SEL] button to change the quality setting.
Record Setup allows you to set up recording channels.
Press [▲，▼，◄◄ and ►►] to select a channel, and then
press [SEL] to change the setting to on or off.
If a channel is disabled in Camera Setup, it will not be
recorded, and the characters “NOCAM” will be displayed
on screen.
1 ON 2 NO
Record Setup
3 ON 4 ON
( ) MOVE (SEL) SELECT (MENU) ESC
1 3 FPS 2 5FPS
Record Framerate
TOTAL 36 FPS
3 25FPS 4 3FPS
( ) MOVE (SEL)+ (
■ )- (MENU) EXIT
Main Menu
CAMERA SETUP
RECORD SETUP
RECORD FRAMERATE
VIDEO QUALITY HIGH
RECORD SCHEDULE
SENSOR SETUP
HARD DRIVE SETUP
MISCELLANEOUS SETUP
RESET MENU
( ) MOVE (SEL) SELECT (MENU) ESC