Filter
Top Products
QSD2014 User’s Manual
4
Chapter 3： DVR Installation
3.1 Hard Disk Installation
Notice: Don’t take out the HDD when DVR is running.
(1) Remove the top cover carefully;
(2) Connect the power cord and data cable to hard drive;
(3) Replace the top cover;
3.2 Connecting Camera and Monitor
Attach the Camera cable to the DVR’s BNC video inputs, and DVR’s video output signal to
Monitor’s video input jack respectively (refer to Chapter-2.2 Rear Panel shown)
3.3 Connecting Power Supply
Please only use the power adapter supplied with the DVR.