Filter
Top Products
QSD2014 User’s Manual
11
5.15 Miscellaneous Setup – Password Enable
5.16 Miscellaneous Setup – Keypad tones
5.17 Miscellaneous Setup- SEQ. DWELL TIME
5.18 Miscellaneous Setup- VIDEO LOSS SOUND
When Password Enable is set to “on”, the
password will be required and
must be entered
correctly; otherwise, you will not be able to enter the
system.
Entering the password will not be required if you
set to “off” (except of formatting hard drive and menu
reset）
This function allows you to enable or disable beeper
sound when pressing [SEL] button to select ON or
OFF.
Press [◄◄], [►►] buttons to select
Seq. Dwell time and select “on” / “off” to
enable or disable individual camera sequential
display.
Remark: Seq. Dwell Time Option can be
1sec, 5sec, 10sec, 15sec, 30sec, or 60sec
Miscellaneous Setup
CHANGE PASSWORD
SET TIME
HIDDEN CHANNEL
IMAGE PARAMETERS
PASSWORD ENABLE
KEYPAD TONES
SEQ. DWELL TIME
VIDEO LOSS SOUND
( ) MOVE (SEL) SELECT (MENU) EXIT
[OFF]
[ CH1 ]
[ OFF]
[ ON ]
[ 30 ]
[ ON ]
Miscellaneous Setup
CHANGE PASSWORD
SET TIME
HIDDEN CHANNEL
IMAGE PARAMETERS
PASSWORD ENABLE
KEYPAD TONES
SEQ. DWELL TIME
VIDEO LOSS SOUND
( ) MOVE (SEL) SELECT (MENU) EXIT
[OFF]
[ CH1 ]
[ OFF]
[ ON ]
[ 30 ]
[ ON ]
Miscellaneous Setup
CHANGE PASSWORD
SET TIME
HIDDEN CHANNEL
IMAGE PARAMETERS
PASSWORD ENABLE
KEYPAD TONES
SEQ. DWELL TIME
VIDEO LOSS SOUND
( ) MOVE (SEL) SELECT (MENU)EXIT
[OFF]
[ CH1 ]
[ OFF]
[ ON ]
[ 30 ]
[ ON ]
This
function allows you to enable or disable
buzzer sound when pressing [SEL] button to select
ON or OFF.
Miscellaneous Setup
CHANGE PASSWORD
SET TIME
HIDDEN CHANNEL
IMAGE PARAMETERS
PASSWORD ENABLE
KEYPAD TONES
SEQ. DWELL TIME
VIDEO LOSS SOUND
( ) MOVE (SEL) SELECT (MENU)EXIT
[OFF]
[ CH1 ]
[ OFF]
[ ON ]
[ 30 ]
[ ON ]