Filter
Top Products
5.3.3. AUTO SEQUENCE SETUP
Set the Display Time of Auto Sequence. Press “ENTER” button, the auto sequence setup
window will appear, which is illustrated below:
Set the time of the selected channel. Time can be set in a range from 0 to 99 seconds.
5.4 RECORD SETUP
OVER WRITE: if set to “YES” the DVR will automatically overwrite the HDD from the beginning
when the HDD is full. If set to “NO” the DVR will stop recording automatically when the HDD is full.
If there are two HDD in the DVR, when the MASTER HDD is full, the video will be stored on the
SLAVE HDD, and when the SLAVE HDD is also full the DVR will overwrite the MASTER HDD.
REC SPEED: the factory default setting for recording frame rate of the DVR is 120F/SEC for
NTSC (100F/SEC for PAL), divided among the cameras. This means the DVR records events at
the speed of about 8 shots or frames per second per camera. The higher the record frame rate,
the more natural the display on the screen will look when you playback. The lower the record
frame rate, the more you space you save on the hard drive. The highest frame rate is 120F/SEC
NTSC (100F/SEC PAL) when the resolution is set to CIF.
21