Q-See QSD2216C16-250 DVR User Manual


 
REC QUALITY: There are four video quality settings: VERY LOW, LOW, NORMAL, HIGH and
VERY HIGH. The higher the video quality, the clearer the images when you playback. The lower
the video quality the more space you can save on the hard drive.
RESOLUTION: The record picture size of the DVR. There are two modes: CIF (360) and Field
(720), default is CIF. In Field mode the record picture is twice as large as it is in CIF mode. In CIF
mode the REC speed is 120F/SEC NTSC100F/SEC PALand the maximum REC speed in
Field mode is 60F/SEC NTSC (50F/SEC PAL).
PB SPEED: The frame rate for playback, default is the same as record speed
RECORD LENGTH (PACKET TIME): When recording manually the time length of each record.
5.4.1
AUDIO CHANNEL SETUP
Move the cursor to Audio CH Set and press the “ENTER” button. The Audio CH setup window
will appear which is illustrated above.
There are four audio input channels, which can be used on any one of the 16 channels. Although
there are four audio input channels, you can only record one channel’s audio at a time, so for the
audio set you have to select one channel from the four in the Record Setup menu.
22