Filter
Top Products
Notice: The above suggestions are a guide based on testing in a general environment.
You will need to select the best settings according to the actual operation environment
you are covering. Try different settings until you get the desired motion detection
result.
5.6.2 MOTION AREA SET
Move the cursor to Motion Area Set, then press the Enter button, and the area setup window
will appear. Press the UP, DOWN, LEFT, RIGHT buttons to move the cursor and press the
Enter button to change from detection ON to OFF. Press and hold the Enter button to change
all values to the same as the area you have selection.
If the area marker icon is set to yellow this area is monitored for motion detection, if the icon
is blue motion detection is disabled for that area.
28