Filter
Top Products
71
Using an IR/RF Remote to Control Your DIRECTV HD
Receiver
You can skip this section if you do not have an RF Remote Antenna and RF Capable Remote (sold
separately) or you setup your RF Remote Control during Guided Setup. is information is included
here if you skipped that part, or if you want to change your Remote setup later.
e remote control included with your DIRECTV HD Receiver works using IR (infrared). IR is
typical of remotes you are already familiar with from other remotes you may have — the remote must be
pointed at the device for it to respond. If you have an RF Remote Antenna and RF Capable Remote,
you can use them to operate the DIRECTV HD Receiver without having to point your remote directly
at it, such as when the receiver is installed in a cabinet, or you use the remote from another room in your
house. e operating range of an RF Remote is up to 200 feet, with some possible decrease due to weak
batteries or obstacles such as walls in your house. Once programmed, your RF Remote will be addressed
to only one receiver, so will not aff ect other receivers in your home.
To setup an RF Capable Remote, press the MENU key, press SELECT on Settings, then select Remote
from the left menu. Press SELECT on the IR/RF Setup button. Follow the onscreen instructions to
confi gure your remote.
A remote that
can go through
walls? That’s
right: We’re
rethinking your
remote, too.