Filter
Top Products
10
SETTING UP A TV1 UHF PRO REMOTE FOR THE
DISH P
LAYER-DVR 522 AND 625 ONLY
Use these special instructions only if you are going to use the green 1
UHF Pro key to control the TV1 side of your DISH Player-DVR 522 or
625.
When you are finished setting up the remote control, you’ll be able to
operate the TV1 side of your DISH Player-DVR 522 or 625 from long
distances.
1. Make sure the key is installed as described on pages
C-1 and C-2.
2. Make sure the UHF Antenna is attached to the back
of the receiver.
3. Using the receiver’s front panel buttons, press MENU. Select the
following onscreen items in this sequence:
a. System Setup.
b. Installation.
c. TV1 UHF Pro Setup.
4. Select Enable from the TV1 UHF Pro Setup screen.
5. Select System Info to open the System Information screen.
62book.book Page 10 Tuesday, April 4, 2006 1:45 PM