Filter
Top Products
Configuration D-Link Web Smart Switch User Manual
1
1
7
7
The SNMP Setting allows you to quickly enable or disable the SNMP function. The default SNMP Setting is
Disabled. Click Enabled and then click Apply to make it effective.
SNMP
Figure 4.3 – SNMP in Smart Wizard
NOTE: Changing the system IP address will
disconnect you from the current connection.
Please enter the correct IP address in the Web
browser again and make sure your PC is in the
same subnet with the switch. See Login Web-
based Management for a detailed description.
When IP Address in Step 1 is changed, the following dialog box appears. Click OK to confirm all settings in
the Wizard, and start a new web browser.
Figure 4.4 – Confirm the changes of IP address in Smart Wizard