D-Link DGS-1210-16 TV Receiver User Manual


 
Configuration D-Link Web Smart Switch User Manual
4
4
7
7
Multicast MAC Address: The MAC address of the static source of multicast packets. This must be a
multicast MAC address.
Port: Allows the selection of ports that will be members of the static multicast group.
Member - The port is a static member of the multicast group.
None - When None is selected, the port will not be a member of the Static Multicast Group.
The Multicast Filtering Mode function allows users to select the filtering mode for IGMP group per VLAN
basis.
L2 Functions > Multicast > Multicast Filtering Mode
Figure 4.52L2 Functions > Multicast > Multicast Filtering Mode
VLAN ID: Specifies the VLAN ID.
Filtering Mode:
Forward Unregistered Groups - The multicast stream will be forwarded based on the register table
in registered group, but it will be flooded to all ports of the VLAN in unregistered group.
Filter Unregistered Groups - The registered group will be forwarded based on the register table
and the unregister group will be filtered.
Click Apply to make the changes made.
SNTP or Simple Network Time Protocol is used by the Switch to synchronize the clock of the computer. The
SNTP settings folders contain two windows: Time Settings and TimeZone Settings. Users can configure the
time settings for the Switch, and the following parameters can be set or are displayed in the Time Settings
window.
L2 Functions > SNTP > Time Settings
Figure 4.53L2 Functions > SNTP > Time Settings
Clock Source: Specify the clock source by which the system time is set. The possible options are:
Local - Indicates that the system time is set locally by the device.
SNTP - Indicates that the system time is retrieved from a SNTP server.