D-Link DPG-1200 Home Theater Server User Manual


 
11D-Link DPG-1200 User Manual
Section 1 - Product Overview
Component Output
Plug the component cables (not included) into
the PC-on-TV device, and plug the other end
into your television or home theater projector.
Back Panel
Wireless Antenna Connector
Attach the supplied antenna by threading
it onto the antenna connector.
Composite Audio/Video Output
Plug the supplied 3.5mm mini-jack connector
into the PC-on-TV device.
RJ-45 Ethernet Connector
Connect the supplied Ethernet cable to the
network cable connector, and attach the other
end to a router or hub on your network.
VGA Output
Plug one end of the VGA cable (not included) into the PC-on-TV device,
and plug the other end into your television or home theater projector.
Reset
Using a small pointed object, depress the
reset switch for 10 seconds.
IR Extender port
Plug in the supplied IR extender that
allows your remote control to access the
PC-on-TV device, if your PC-on-TV device
is not physically visible.
Power Receptor
Plug in the supplied power adapter
into the PC-on-TV power receptor.