Dolby Laboratories 6000 DVR User Manual


 
-15-
REPEAT
Repeat play function. Use
/ to move the
cursor to the icon, use
/, REPEAT or
ENTER to select required repeat play function.
a. Repeat a chapter.
Push REPEAT or use
/, the screen shows:
b. Repeat a title
Push REPEAT again or use
/, the screen shows:
c. Repeat a disc
Push REPEAT again or use
/, the screen shows:
d. Remove REPEAT function.
Push REPEAT again or use/, to cancel the repeat
function. The screen display:
REPEAT A-B
Repeat play from A to B selected. Use
/to
move the cursor to the icon, use
/, A-B or
ENTER to select required repeat play function.
a. Press A-B , set a starting point A. The screen shows:
A-B
b. Press A-B again, set a end point B. The screen shows:
A-B
Afterwards, the unit plays from A to B always.
c. Then press A-B , remove A-B repeat.
Notes: Only press A-B or
/ to remove A-B repeat.
BOOK/ MARK
Set a bookmark. Use
/to move the cursor
to the icon, use digit key to select required
position, press ENTER to confirm the selection.
At maximum five bookmarks (1,2,3,4,5) can be set. This
operation is valid only when “BOOKMARK” is
displayed on OSD. You may also use
/ to move the
cursor to a bookmark and press ENTER to jump to the
position set and play.
2. When playing VCD, Super-VCD
Push DISPLAY, The TV screen shows the information
about the disc and player status.
TRACK
Display current track. Use
/to move the
cursor to the icon, use / or digit key to
select required track, and press ENTER to confirm the
selection when the PBC function is “OFF”.
TIME
Display current time. Use
/ to move the
cursor to 00:00:00, input time by pressing digit
key, press ENTER to confirm the time setting.
AUDIO CHANNEL
Audio channel selection. Use
/ to move
the cursor to the icon, use / to select
required audio channel, and to confirm the
selection. You can also use R/L to select required audio
channel.
PLAY MODE
Play mode selection. Use
/ to move the
cursor to the icon, use / to select required