Dolby Laboratories DV2418 TV DVD Combo User Manual


 
Basic Playback
SEARCH
1
2
3
4
5
6
7
8 9
0
DVD MENU
TITLE
ENTER
PLAY
STOP
SR/SF
REW/PREV
RETURN
OPEN/CLOSE
DSP/OSD
STEREO/AUDIO&CH
FWD/NEXT
PAUSE/STEP
REPEAT A-B
ANGLE
SUBTITLE
CH
MENU
CH
Cable/SAT
DVD COMBO
SET
MUTE
AV/SETUP
+10
SLEEP
VCR
TV
VOL
VOL
TV/DVD
+
-
Preparation
Insert the AC cord plug into the specified polarized AC outlet.
Press POWER to turn on the unit.
When using an amplifier, switch on the amplifier.
1
Press TV/DVD to select the DVD mode.
“LOADING” changes to “NO DISC”.
(If a DVD disc has already been loaded,
the playback will start automatically)
NO DISC
2
Press OPEN/CLOSE to open the disc
tray.
3
Place a disc onto the tray. Hold the disc,
position it with the printed label side up,
align it with the guides, and place it in its
proper position.
Label must face
upward.(With
double-sided
discs, load so the
label for the side
you want to play
is facing up.)
4
Press PLAY or OPEN/CLOSE to close
the disc tray and automatically start the
playback.
A menu screen will appear on the TV screen
if the disc has a menu feature.
In case of many movie DVDs, an interactive
DVD or Video CD with playback control, a
menu screen appears.
Start Playback
LOADING
5
Press 3/4 or 5/6 to select title.
TITLE MENU
Castles
Lovers
Birds
Example of DVD
Title is selected and playback starts.
6
Press ENTER.
Stop Playback
1
Press STOP to end playback.
The DVD player will remember where you stopped the playback
(depending on type of disc).
PRESS PLAY KEY TO CONTINUE” appears on the screen. Press
PLAY to resume playback from the stopped point.
If you press STOP again or unload the disc, the unit will clear the stopped
point.
When the player is not in use, press OPEN/CLOSE to open the disc tray.
Remove the disc and press POWER on the remote or television set.
The disc tray closes automatically and unit turns off.
After Operation
Note
=
The disc continues to rotate while
the menu is displayed even after the
player has finished playing a
particular item. When no further
selections are to be played, be sure
to press STOP to clear the menu
display.
=
If appears on the screen when a
button is pressed, the operation is
prohibited by the player or disc.
=
In stop mode, if there is no operation
for 1 minute, the screen saver starts
up (this feature needs to be set in
advance). If there is no operation for
5 minutes, the DVD goes to sleep
mode automatically.
=
In some cases, a blue screen may
appear when you press TV/DVD. To
go back to TV or AV mode, press this
button again.
Dogs
32
In DVD mode, you can press TV/DVD to switch back to TV or AV mode,
which depends on the previous mode before the DVD mode is selected.
For example, you had switched the unit to DVD mode from AV mode, now
if you press TV/DVD, the unit goes back to AV mode.
Switch from DVD to TV or AV
/ZOOM