Dynex DX-RCRT20-09 CRT Television User Manual


 
10
Setting up your T
V
Setting up your TV
Connecting your TV to AC power
Warning:
- Never connect the AC plug to other than the specified voltage (120V 60 Hz). Use the
attached power cord only.
- If the polarized AC cord does not fit into a non-polarized AC outlet, do not file or cut the
blade. It is your responsibility to have an electrician replace the obsolete outlet.
Note: If you cause a static discharge when touching the TV and the TV fails to work, unplug
the TV from the AC outlet, then plug it back in. The TV should work normally.
Installing batteries in the remote control
Before using the remote control, you must install batteries. Use two AAA size batteries. The
batteries may last about one year depending on how much the remote control is used. For
best performance, we recommend the batteries should be replaced on a yearly basis, or
when the remote control operation becomes erratic. Do not mix old and new batteries or
different types of batteries.
AC outlet
Wider hole
and blade
Polarized AC plug (one blade is
wider than the other.)