Filter
Top Products
18
Using your T
V
3 Press ENTER.
Viewing the program guide (digital TV only)
To view the program guide:
•Press GUIDE on the remote control to display the program guide.
Adjusting the volume
To adjust the volume:
•Press VOL+ to increase the volume or VOL– to decrease the volume.
•Press MUTE to mute the sound. Press MUTE again to restore the sound (you can also
restore the sound by pressing VOL+).
Setting up the channels
The first time you turn on the TV, you should use AUTO SCAN to automatically set up the
available channels on your TV. This lets you use the CH – or CH + buttons to go to the
previous or next channels.
To set up the channels:
1 Press MENU on the TV or remote control. The on-screen display (OSD) opens.
2 Press VOL+ or VOL– to select CHANNEL, then press CH –. The CHANNEL menu opens.
3 Press CH + or CH – to select RECEPTION, then press VOL+ or VOL– to select the
signal mode you want. You can select:
• AIR–Analog and digital antenna signals,
• CABLE–Analog and digital cable signals.
4 Press CH + or CH – to select AUTO SCAN, then press VOL+ to begin scanning for
channels.
The TV begins to search for, and memorize, all available TV channels. This process takes
several minutes. When the scan is complete, the lowest memorized channel is
displayed. If you press MENU during the scan, the scan is cancelled and the lowest
memorized channel is displayed.