Be d Re d e f i n e R
Op e R a t O R 's Ma n u a l
25
b l a d e r e p l a c e m e n t /l u b r I c a t I o n
Level 1.
Parts Required: POWER BLENDX
TM
8 oz. (P/N 91014) or Lithium
Base Grease, Blade P/N 99944208000, split
pin P/N 90030020022
NOTE
Grease gear case every 15 - 25 hours of use. Replace blade when
carbide tips have worn away.
1. Shut engine off. Disconnect spark plug lead from spark plug.
2. Remove split pin (A).
3. Rotate blade until holes in inner blade adapter (B) and gear box
align. Insert locking tool to lock PTO shaft (C).
NOTE
Blade nut (D) is left hand thread.
4. Remove blade nut (D) in a clockwise direction using T-wrench.
Remove outer xing plate (E), blade (F) and inner xing plate (B).
5. Clean all loose debris from gear box.
6. Remove plug (G) and check level of grease. Grease should ll gear
case to bottom of grease plug hole.
7. Add grease if necessary using squeeze-type tube. Do not use high
pressure grease gun. DO NOT over-ll.
a
B
C
D
E
F
g