Filter
Top Products
26
COMPUTER MODE
1
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to select
IMAGE ~ and press the SELECT button. Another dialog
box PICTURE IMAGE ADJUSTMENT Menu will appear.
2
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to the item that you want to
change by pressing the POINT UP/DOWN buttons. To
change the value, press either the POINT RIGHT button
or the POINT LEFT button.
Fine sync
Adjust the picture as necessary to eliminate flicker from the
display. (From 0 to 255.)
Total dots
The number of the total dots in one horizontal period. Adjust the
number to match your PC image.
White balance (Red I Green I Blue)
Move the arrow to the color that you want to adjust. Press
POINT LEFT button to lighten the color and press POINT
RIGHT button to deepen the color. (From 0 to 63.)
Contrast
Press POINT LEFT button to decrease contrast, and press
POINT RIGHT button to increase contrast. (From 0 to 63.)
Brightness
Press POINT LEFT button to adjust the image darker, and
press POINT RIGHT button to adjust brighter. (From 0 to 63.)
Gamma
Press either POINT LEFT button or POINT RIGHT button to
obtain better balance of contrast. (From 0 to 16.)
Each of the keys operates as follow.
Reset Recalls the data previously adjusted.
Stored Stores the adjusted data in the memory.
Quit Closes the PICTURE IMAGE ADJUSTMENT Menu.
NOTE: The Fine sync and the Total dots
cannot be fully adjusted when “RGB,”
“HDTV1O35i” or “HDTV1O8Oi” is
selected on the SYSTEM MENU (P22
and 23).
NORMAL FUNCTION
The normal picture level is preset on this projector at the factory and can be
restored anytime you press the NORMAL button (located on the Top Control
or on the Remote Control Unit). The “Normal” display will be displayed on the
screen for a few seconds.
ADJUST PICTURE IMAGE MANUALLY