Filter
Top Products
33
SETTING
Power management
This function turns the Projection Lamp off when the projector
detects signal interruption and the projector is not used for a
certain period in order to reduce power consumption and
maintain the Lamp-life. (This projector is shipped with this
function ON.)
Power Management function operates to turn the Projection
Lamp off when the input signal is interrupted and the projector
is not operated over 5 minutes. This function operates as
follows;
1.
When the signal is interrupted, “No signal” and the
counting down (5 minutes) display appears.
2.
When the Projection Lamp turned off, the READY
indicator turns off. The Cooling Fans operate for 90
seconds after the Projection Lamp is turned off. (During
this “Cooling Down” period, the Lamp cannot be turned
on.)
3.
When the Lamp has cooled down, the READY indicator
flashes and the Lamp can be turned on again (Power
Management mode).
In this Power Management mode, the Projection Lamp is
automatically turned on when the input signal connected
or the projector is operated with any button on the Top
Control or the Remote Control.
Lamp age
The Lamp age function is designed to reset the lamp
replacement monitor timer. When replacing the lamp, reset
the lamp replacement monitor timer by using this function.
(Refer to page 36.)
The language used in the ON-SCREEN MENU is selectable
from among English, German, French, Italian, Spanish and
Japanese.
1
Press the MENU button and the ON-SCREEN MENU will
appear. Press POINT LEFT/RIGHT buttons to select
LANGUAGE and press the SELECT button. Another
dialog box LANGUAGE Menu will appear.
2
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to the language that you want to
set, and then press the SELECT button.