Filter
Top Products
31
1
Press the
MENU button
and the ON-SCREEN MENU will
appear. Press
the POINT LEFT/RIGHT buttons to select
IMAGE
and press the SELECT button. Another dialog box PICTURE
IMAGE ADJUSTMENT Menu will
appear.
2
Press the POINT DOWN button and a red-arrow icon will
appear.
Move the
arrow to the item that you want to adjust by
pressing
the POINT
UP/DOWN buttons.
To
change
the
value, press either
the
POINT
RIGHT button or the
POINT
LEFT button.
Color
Press
POINT LEFT button to lighten the image, and
press
POINT RIGHT button
to
deepen
the
image.
(From 0 to 63.)
Tint
Press POINT LEFT button to increase purple, and press POINT
RIGHT button to increase green. (From 0 to 63.)
White balance (Red I Green I Blue)
Move the arrow to the color that you want to adjust. Press
POINT LEFT button to lighten the color, and press POINT
RIGHT button to
deepen the color. (From 0 to 63.)
Contrast
Press POINT LEFT
button to decrease contrast, and press
POINT
RIGHT
button to increase contrast. (From 0 to 63.)
Brightness
Press POINT LEFT button to darken the image, and press POINT
RIGHT button to brighten the image. (From 0 to 63.)
Sharpness
Press POINT
LEFT button
to soften the image, and press POINT
RIGHT button to sharpen the image. (From 0 to 15.)
Gamma
Press either POINT LEFT button or POINT RIGHT button to obtain
better balance of contrast. (From 0 to 16.)
Each of the keys operates as follow.
Reset
•..
Recalls the data previously adjusted.
Stored
....
Stores the data in the memory.
Quit Closes the PICTURE IMAGE ADJUSTMENT Menu.
NORMAL FUNCTION
The normal picture level is preset on restored anytime you press the
NORMAL button (located on the Top Control or on the Remote
Control Unit). The “Normal” display will be displayed on the screen
for a few seconds. this
projector at
the factory and can be
ADJUSTING THE PICTURE IMAGE