Filter
Top Products
- 30 -
0 Thermal Monitor (Read only)
0 LM76(Temp) A Monitor - - Sensor A for External IC1691
1 LM76(Temp) B Monitor - - Sensor B for Lamp IC1816
2 LM76(Temp) C Monitor - - Sensor C for Panel IC1814
1 Atmosphere Monitor (Read only)
0 MPXA4114A(Pressure) Monitor - - Atmosphere sensor
1 MPXA4114A(Pressure) Monitor - - Atmosphere sensor [unit: mmHg]
2 MPXA4114A(Pressure) Monitor - - Atmosphere sensor [unit:hpa]
3 Acceleration Monitor (Read only)
0 MAS1390 (Acceleration) Monitor
5 FAN Monitor (Read only)
0FAN A Monitor (PBS) - - Current voltage of Fan (0.01V unit)
1FAN B Monitor (Lamp-IN) - - Current voltage of Fan (0.01V unit)
2FAN C Monitor (Lamp-Front) - - Current voltage of Fan (0.01V unit)
3FAN D Monitor (Power) - - Current voltage of Fan (0.01V unit)
4FAN E Monitor (Panel) - - Current voltage of Fan (0.01V unit)
5FAN F Monitor (Exhaust) - - Current voltage of Fan (0.01V unit)
10 RS232C Setting
0 Baurate 0 0 / 1 RS232C baurate (0: 19200 / 1: 9600)
1Serial mouse switch 0 0 / 1 Serial mouse setting (0: Enable / 1: Disable)
11 PJ-Net Setting
0 Reset Disable 0 0 / 1 PJ-Net Reset (0: Enable / 1:Disable)
20 Logo prohibition
0 Logo prohibition 0 0 / 1 Logo prohibition (0: Menu / 1: Forced)
30 Color Shading/Gamma
0 Color Shading Correction On/Off 0 0 / 1 Color Shading Correction (0: Off / 1: On) Not memorized
1 Gamma Correction On/Off 0 0 / 1 Gamma Correction (0: Off / 1: On) Not memorized
40 Dimmer Control
1 Dimmer Level 15 0 ~ 15 0:250 ~ 15:300W Effect only 300W
2 DIMMER CTRL LEVEL1 7 0 ~ 255 Bright level1 data: Bright level1 when less than the value
3 DIMMER CTRL LEVEL2 14 0 ~ 255 Bright level2 data: Bright level2 when less than the value
4 DIMMER CTRL LEVEL3 21 0 ~ 255 Bright level3 data: Bright level3 when less than the value
5 DIMMER CTRL LEVEL4 28 0 ~ 255 Bright level4 data: Bright level4 when less than the value
6 DIMMER CTRL LEVEL5 35 0 ~ 255 Bright level5 data: Bright level5 when less than the value
7 DIMMER CTRL LEVEL6 42 0 ~ 255 Bright level6 data: Bright level6 when less than the value
8 DIMMER CTRL LEVEL7 49 0 ~ 255 Bright level7 data: Bright level7 when less than the value
9 DIMMER CTRL LEVEL8 56 0 ~ 255 Bright level8 data: Bright level8 when less than the value
10 DIMMER CTRL LEVEL9 63 0 ~ 255 Bright level9 data: Bright level9 when less than the value
11 DIMMER CTRL LEVEL10 70 0 ~ 255 Bright level10 data: Bright level10 when less than the value
12 DIMMER CTRL LEVEL11 77 0 ~ 255 Bright level11 data:Bright level11 when less than the value
13 DIMMER CTRL LEVEL12 84 0 ~ 255 Bright level12 data:Bright level12 when less than the value
14 DIMMER CTRL LEVEL13 91 0 ~ 255 Bright level13 data:Bright level13 when less than the value
15 DIMMER CTRL LEVEL14 98 0 ~ 255 Bright level14 data:Bright level14 when less than the value
16 DIMMER CTRL LEVEL15 105 0 ~ 255 Bright level15 data: Bright level15 when less than the value
17 DIMMER AVE POINT 4 1 ~ 16 Average point data for dimmer 1~16 4
50 Auto-Picture Control
0 Auto-Picture Control Forced OFF 0:follows to Menu, 1:Forced OFF
70 COOLING
0 COOLING_TIME Cooling time period after power off
1 Not used
80 Factory use
0
90 PJ Operation History
0 OPERATION_HISTORY_1 0 0 ~ 32767 Operation history in latest operation
~
49 OPERATION_HISTORY_50 0 0 ~ 32767 Operation history in latest 50th operation
50 OPERATION_HISTORY Reset 0 0 ~ 10 It resets the history when the value is changed to 10.
91 PJ Failure History
0Warning_Log_1 0 0 ~ 32767 Operation history in last operation
~::
49 Warning_Log_50 0 0 ~ 32767 Operation history in last 50th operation
50 Warning_Log Reset 0 0 ~ 10 It resets the history when the value is changed to 10.
112 Lamp Config
0 Lamp Config Change 2500 1000 ~ 8000 Lamp life selection (Step: 500H)
113 Lamp Reset Counter (Read only)
0 Lamp Reset counter 0 0 ~ 127 Reset times of the lamp time counter
Group No. Adjustment Item Initial Value Range Input source / Description
Electrical Adjustments
Service Adjustment Data T
able
These initial values are the reference data written from the CPU
ROM to memory IC when replaced new memory IC. The adjust-
ment items indicated with “✻” are required to readjust following
to the “Electrical adjustments”. Other items should be used with
the initial data value.