Filter
Top Products
www.emachines.com
9
2 If the image looks correct, choose Yes. The OSD will close automatically.
-OR-
If the image requires further adjustment, choose No. The Phase bar opens to let you adjust
the setting manually.
3 Adjust the phase by pressing the + or – buttons. When all text appears well focused and
there is no instability in the image, press Menu to end the adjustment and close the OSD
menu.
Audio setup by direct key
To adjust the volume by direct key:
1 With no OSD menu open, press the + or – buttons. The Volume bar opens.
2 Press the + or – buttons one or more times to set the volume to a comfortable level.