Filter
Top Products
33
MODEL 5081T-FF/FI SPECIFICATIONS
TRANSMITTER DISPLAY DURING
CALIBRATION AND PROGRAMMING
(FIGURE 1)
1. Continuous display of conductivity, % concentration,
or custom reading.
2. Units: µS/cm, mS/cm, ppm, %, or none.
3. Current menu appears here.
4. Submenus, prompts, and diagnostic readings appear
hear.
5. Commands available in each submenu or at each
prompt appear here.
6. Hold appears when the transmitter is in hold.
7. Fault appears when the transmitter detects a sensor
or instrument fault.
INFRARED REMOTE CONTROLLER
(FIGURE 2)
1. Pressing a menu key allows the user access to calibrate,
program, or diagnostic menus.
2. Press ENTER to store data and settings. Press NEXT
to move from one submenu to the next. Press EXIT to
leave without storing changes.
3. Use the editing keys to scroll through lists of allowed
settings or to change a numerical setting to the desired
value.
4. Pressing HOLD puts the transmitter in hold. Pressing
RESET causes the transmitter to abandon the present
operation and return to the main display.
FIGURE 2. INFRARED REMOTE CONTROLLER
1.
4.
3.
2.
CALIBRATE PROGRAM DIAGNOSE
/-[5ES-U1
EXIT NEXT ENTER
mS
F
A
U
L
T
H
O
L
D
6
7
3
4
1
2
5
FIGURE 1. TRANSMITTER DISPLAY DURING
CALIBRATION AND PROGRAMMING
The program display screen allows access to
calibration and programming menus.
#'"
REMOTE CONTROL
INTRINSICALLY SAFE EQUIPMENT
HAZARDOUS AREA LOCATIONS:
CLASS I, DIV 1, GP A, B, C, D
CLASS I, DIV 2, GP A, B, C, D
T3C Tamb = 40°C T3 Tamb = 80°C
1.5Vdc AAA BATTERIES
EVEREADY E92/1212
DURACELL MN2400/PC2400
IS/I/1/A,B,C & D
NI/I/2/A,B,C & D
T4 Tamb = 40°C
T3A Tamb = 80°C
Baseefa02ATEX0198
II 1G EExia IIC T4 1180
1.5Vdc AAA BATTERIES
EVEREADY E92/1212
DURACELL MN2400/PC2400
ROSEMOUNT ANALYTICAL 92606 USA
WARNING:
TO PREVENT IGNITION
CHANGE BATTERIES IN
A NONHAZARDOUS AREA
ONLY
IRC - INFRARED REMOTE CONTROL
LR 34186
Exia
SUBSTITUTION OF
COMPONENTS MAY
IMPAIR INTRINSIC SAFETY
PN 23572-00
YEAR