Emerson EWC19D1 TV DVD Combo User Manual


 
14
EN
0C28
14
CONNECTING TO A DOLBY DIGITAL DECODER
OR DTS DECODER (for DVD)
If using this TV/DVD to play back a TV/DVD in a 5.1 channel Dolby Digital surround or DTS surround for-
mat, the TV/DVD outputs a Dolby Digital or DTS data stream from its COAXIAL digital audio out jack. By
hooking the player up to a Dolby Digital or DTS decoder, you can enjoy a more convincing, realistic ambi-
ence with powerful and high-quality surround sound of a professional standard such as can be heard in movie
theaters.
Use audio coaxial digital cables (commercially available) for the audio connections.
NOTES:
Be sure to turn off the power to all components in the system before connecting another component.
Refer to the Owner's Manuals for the components to be connected to the TV/DVD.
If connected to a Dolby Digital decoder, set DOLBY DIGITAL to ON for audio output in the setup mode.
If connected to a DTS decoder, set DTS to ON for audio output in the setup mode.
Unless connected to a Dolby Digital decoder or a DTS decoder, set DOLBY DIGITAL and DTS to OFF for
audio output in the setup mode. Playing a TV/DVD using incorrect settings may generate noise distortion,
and may also damage the speakers.
When DOLBY DIGITAL is set to OFF and VIRTUAL 3D to ON for audio output in the setup mode and
you select the audio source in a 5.1 channel Dolby Digital surround format, the audio will be muted.
LR
AUDIO OUT
1
DIGITAL OUT
COAXIAL
ANT.
Front speaker
(left)
Center
speaker
Front speaker
(right)
Surround
speaker
(left)
Surround
speaker
(right)
Subwoofer
To DIGITAL AUDIO OUT
(PCM/BITSTREAM)
COAXIAL jack
To COAXIAL DIGITAL
AUDIO INPUT jack
Dolby Digital
or DTS decoder
Manufactured under license from Dolby
Laboratories. Dolbyand the double-D
symbol are trademarks of Dolby
Laboratories. Confidential Unpublished
Works. ©1992-1997 Dolby Laboratories, Inc.
All rights reserved.
DTSand DTS Digital Outare trademarks
of Digital Theater Systems, Inc.
[Fig. 11]
TD251EN 01.5.31 7:15 PM Page 14