Filter
Top Products
–
25
–
EN
0C28
–
25
––
25
–
A-B REPEAT
You can define a section to be played back repeatedly.
1
Press the A-B REPEAT button during playback.
¡The starting point (A) will then be
selected.
2 Press the A-B REPEAT button again at the
end point (B) of the desired section.
¡
The selected section will be
played back repeatedly.
3 To exit A-B repeat playback, press the A-B
REPEAT button and set it to OFF.
Notes
¡With DVDs, the A-B repeat section can be set only
within the current title.
¡With audio CDs, the A-B repeat section can be set
within the current track.
¡A-B repeat is not available with some scenes in
DVD.
¡To cancel the A point which was set, press RETURN
button.
CDDVD
Repeat
[ A - ]
PROGRAM (Audio CD)
1
Press the MODE button in stop mode.
¡The program screen will appear.
CD
Audio CD
Program
Total
[Track]
– –
[Time]
0:00:00
Random
: MODE
Track 00 / 15
Exit
: RETURN
Start : PLAY
Delete
: CLEAR
Repeat
[ A - B ]
Repeat
[ off ]
2 Press the numeric buttons to enter the
desired track numbers.
¡
The total playback time for the
selected tracks will appear on the
TOTAL line.
3 Press the PLAY button.
¡
Playback will start in the programmed order.
¡While the program is being played back, the STOP
button works as follows.
¡Press the STOP button once and then the PLAY
button again, playback will restart from the point
where the STOP button was pressed. (Program
continued)
¡Press the STOP button twice and then the PLAY
button again, playback will restart from the first tune
in the program in the usual way. (Program
continued)
¡Press the STOP button three times and then the
PLAY button again, playback will restart from the
track in the usual way. (Program cleared)
Notes
¡Adding programs is not possible during program
playback. You must stop the current playback before
such operations can be carried out.
¡Press the CLEAR button to cancel a program. The
most recently entered program will then be deleted.
¡Numbers which exceed the number of tracks on the
disc in the tray are not accepted.
¡Playback from a desired track and random playback
are not available during program playback.
¡Program settings are cleared when the power is
turned off or the disc loading tray is opened.
¡If the track no. is once set in the program, the setting
cannot be changed.
02 05 07 14 01 09 13 10 03 11
08 04
Audio CD
Program
Total
[Track]
12
[Time]
0:47:29
Random
: MODE
Track 04 / 15
Exit
: RETURN
Start : PLAY
Delete
: CLEAR
TD251EN 01.5.31 7:15 PM Page 25