Filter
Top Products
Overview of the Access Point Configuration
2-6 Access Point Placement and Configuration
d) Enter the wireless MAC addresses of the other Access Points. Click OK when
done. Then click OK in the Wireless Parameters dialog box.
11. For all other Access Points, select LAN-to-LAN Endpoint in the Bridge Mode field.
In the Wireless MAC Address field, enter the wireless MAC address of the remote
Access Point (Point-to-Point) or central Access Point (Point-to-Multipoint).When
done, click OK in the Wireless Parameters dialog box.
12. In the main window, click the Reset button. Choose to Reset with Current Settings.
Allow approximately one minute for the Access Point to reset and run its self-test.