Filter
Top Products
vii
Preface
This guide describes the requirements that are needed for the successful installation of the
RoamAbout outdoor antennas used in a RoamAbout wireless network. A RoamAbout
wireless network consists of RoamAbout wireless products, such as the RoamAbout PC
Card and RoamAbout Access Point, and other wireless products that use an 802.11 Direct
Sequence (DS) compliant radio.
The RoamAbout outdoor antennas need to be installed by an antenna installation
professional who can determine, provide, and install the necessary support structure and
grounding system. The antenna installation professional should be licensed or certified in
accordance with local regulations.
Intended Audience
Chapter 1 contains the information needed by a sales engineer or site evaluator to determine
the type of outdoor equipment needed to satisfy the customer outdoor wireless
requirements.
Chapter 2 is for an antenna installation professional and network manager to determine
where to place the RoamAbout Access Point and Lightning Protector. This chapter also
provides an overview of cabling and configuring the Access Point.
Chapter 3 contains the information needed for an antenna installation professional to setup,
install, and test the RoamAbout outdoor antennas and cables.
ELECTRICAL HAZARD: Only qualified personnel should
perform installation procedures for outdoor antennas.