Filter
Top Products
122
6.3 REMOTE LIVE VIEW
1. Click on a camera number on the left side of the display to switch that camera to full screen. Click on
“4UP” to display 4 screens, click on “9UP” to display 9 screens or click on “16IP” to display 16 screens.
2. You can click the “Mic” button to transfer audio to DVR from client side if there is a microphone
attached to the PC and an amplifier and speaker attached to the DVR. You can also click the
“Speaker” button to transfer audio to the client side from DVR if there is a speaker on the PC and a
microphone and preamp attached to the DVR, and audio recording is enabled on the DVR. Double
click on a camera image to enlarge the current display to full screen; double click again or press “Esc”
to return to the normal view.
3. Main/Sub: Click this icon to switch stream for multi view. Sub stream image is less clear as compared
to the main stream. Select Sub stream if you wish to see smooth image but do not care about the
frame rate. By choosing the main stream, PC performance may affect the frame rate.
4. The status of each camera is represented by different colors on the left side of the screen.
indicates dual stream is recording.
indicates only main stream is recording. Green means normal;
orange indicates a Motion alarm; blue indicates Video Loss, red indicates an alarm event and grey
means disable
5. Menu bar: Menu buttons for setup, search and export, details are explained in following chapters.
Live View
Express Setup
Camera Setup
6
1
5
2
4
3