Filter
Top Products
4
1.4 FRONT PANEL
Your primary interaction with your new DVR will be through the Front Panel buttons and their
corresponding buttons on the included Remote Control. Take a moment to learn where the keys are as the
remainder of the manual will refer to them often.
Figure 1-1 Front Panel
1) IR Receiver: Receiver for IR remote control
2) Live: Press this key to show live view. Press to exit from playback mode.
3) View: Press this key to switch between 4x, PiP (Picture In Picture), and full screen and
9x. Examples of four different views are listed below:
4x PiP Full screen 9x
Note1: PIP display is not available in playback mode.
Note2: 9-screen display available in 8 Channel model only
.
4) SEQ: Press this key to enter the auto sequential switching mode. The sequence dwell
time can be set in “Display Setting” tab of the Menu. For more detail about SEQ,
please see “Section 4.8.2 Display Setting-Main M/T SEQ”.
5) SEARCH: Press this key to enter Search Menu. For more detail about the Search function,
please see “Section 3.12 Search ”.