Filter
Top Products
10
RS232 CODES
Following the header, a comma is used to delimit the
header from the command. All the commands with
their descriptions are listed below. All the text strings
are terminated with a carriage return (0x0d or 13).
Maximum command string length is 250 characters.
The header and command are not case sensitive
.
OPERATION COMMANDS (Used for day-to-day operation)
COMMAND OPTIONS OR RANGE DESCRIPTION
A# (0-2) 0=4x3,1=Letterbox, 2=Anamorphic Input Aspect Ratio – for all sources
B# (0-170) 128 default Brightness
C# (0-155) 110 default Contrast
D# (0-13) 8 default Detail
DVD DVD INPUT
DVI DVI Input
EXT Pass-through Input
FST Report Current System Status
HELP Displays full list of commands for this unit
K# (0-220) 128 default Color
L# (1-8) Store User Preset
OFF Power OFF
ON Power ON
P# (0-8) [1-8=User, 0=Factory] Recall Preset
PATT Display Test Pattern Help
PM# (0-1) [0=Normal1=Bypass] Advanced Color System
PY PassThru Transcoded Input
R RGB input
ST Report Current Status
T# (0-255) 128 default Tint
TP# 0=Off
1=100% Color Bars
2=Reverse Color Bars
3=10-step Grayscale
4=Luma Ramp
5=Cb Ramp
6=Cr Ramp
7=Green
8=Red
9=Blue
10=Convergence
11=Active Boarder
12=SMPTE Color Bars
13=100% Window
14=PLUGE Test Pattern Selection
VVideo input
X YCrCb input
YS-Video input
SETUP COMMANDS (Normally not controlled by RS232)
COMMAND OPTIONS OR RANGE DESCRIPTION
BB# (0-192) Bottom Blanking
BL# (0-252) Border Level – black to white
BLT# (0-255) LCD Backlite Timer on front panel
CS# 1=On 0=OFF Composite Sync – for RGB output
DVD DVI Input Disabled