Filter
Top Products
PAGE 65
FireBall™ FP-1 User’s Manual
SERIAL COM PORT
The Serial Control COM Port setting is used for two-way external control communications with a
third party control system.
If the COM port is not available, you must use the Ethernet based external control for two-way
external control communications with a third party control system.
Follow these steps to select which serial port to use for external control:
1. Press the Setup key on the remote to display the FireBall setup menu.
2. Select the External Control menu item.
3. Select the Serial Control COM Port menu item.
4. Select which serial port to use for external control.