Filter
Top Products
41
14.16 Power Search
Enables the receiver while in “STANDBY MODE” to rescan satellite details in order to add or
adjust Transponder Frequency data and individual channel data. This is extremely useful if the
various satellites make regular changes to data. Ie ASTRA 28.2; ASTRA 19.2; HOTBIRD 13.
y In the “SYSTEM SETTING” Menu.
y Go to “OTHER SETTING” press OK.
y Go to “POWER SEARCH MODE” press e/f buttons
to switch on.
y Select the satellite(s) to be reviewed by pressing OK.
y Next while on the particular satellite press e/f
buttons.
y You now have the option to adjust the type of scan to
complete.
y After you have selected the type of scan press the
RED button to “SAVE” the settings.
y Now use the Back (
) button to go out of the menu and back to “OTHER SETTING”.
Note: POWER SEARCH starts 1minute after going into standby and there is a slight delay in
turning on (2seconds) if receiver is in the middle of scanning satellites. Additionally if you have a
motorized system the receiver will move the motor when in “STANDBY” with the POWER
SEARCH setting ON.
14.17 PVR Function
14.17.1 Recording File
To see a list of the recorded files, push USB button and select
recorded file or push Play button in live mode.
• To select file using ▲/▼, OK buttons or Mosaic (
)
buttons.
• Play (
) button: To play selected file.
• Green button: To edit selected file.(Play, Rename,
Delete, Lock, Unlock)
14.17.2 Recording
• To press REC (
) button on the RCU and begin
recording.
• The recording will be stored on the External memory
and will be shown on the "Recoding File".
•
If you push “REC button” one more time, there will be
menu for recording duration.
- You can change the duration of recording time by
using the e/fbuttons or numeric buttons.
• While recording a program, you can’t change other
channel.
• Default recording time is 2hours.