Fortec Innovation Satellite TV System User Manual


 
9
IMPORTANT SAFETY INFORMATION
POWER SOURCES - This unit should be operated only from the type of power source indicated on
the marking label. If you are not sure of the type of power supply to your home, consult your dealer or
local power company.
OUTDOOR ANTENNA GROUNDING - If an outside antenna or
cable system is connected to the unit, be sure the antenna or cable
system is grounded to provide some protection against voltage
surges and built-up static charges. Section 810 of the National
Electrical Code, ANSI/NFPA No. 70-1984, provides information with
respect to proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna-discharge unit,
connection to grounding electrodes, and requirements for the
grounding electrode. See figure.
POWER LINES - An outside antenna system should not be located in the vicinity of overhead power
lines or other electric light or power circuits, where it can fall into such power lines or circuits. When
installing an outside antenna system, extreme care should be taken to keep from touching such power
lines or circuits, as contact with them might be fatal.
OVERLOADING - Do not overload wall outlets and extension cords as this can result in the risk of fire
or electric shock.
OBJECTS AND LIQUIDS - Never push objects of any kind into this unit through openings as they may
touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never
spill liquids of any kind onto the unit. Should spillage occur, unplug the unit and have it checked by a
technician before use.
SERVICING - Do not attempt to service this unit yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
REPLACEMENT PARTS - When replacement parts are required, be sure the service technician has
used replacement parts specified by the manufacturer or those having the same characteristics as the
original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
SAFETY CHECK - Upon completion of any service or repairs to this unit, ask the service technician to
perform safety checks to determine that the unit is in safe operating order.
PRECAUTIONS
PLEASE READ THIS MANUAL CAREFULLY BEFORE USING THE RECEIVER.
DO NOT OPERATE THE RECEIVER IN AN UNSTABLE CONDITION SUCH AS HIGH
HUMIDITY, HEATING, AND MOISTURE.
STOP THE OPERATION IMMEDIATELY IF ANY LIQUID OR SOLID OBJECT SHOULD FALL
INTO THE RECEIVER.
DO NOT TOUCH OR OPERATE THE RECEIVER WITH WET HANDS.
OPERATE THE RECEIVER ONLY WITH PROPER POWER SOURCE MARKED ON THE
RECEIVER.
UNPLUG THE RECEIVER POWER CORD BY GRIPPING THE POWER PLUG, NOT THE CORD.
DO NOT OPEN THE RECEIVER COVER AND TRY FIX IT BY YOURSELF. ONLY QUALIFIED
SERVICE PERSONNEL ARE ALLOWED TO MAKE REPAIRS.
PLEASE UNPLUG THE POWER CABLE IF IT IS UNUSED FOR A LONG TIME OR DURING
THE BAD WETHER SUCH AS LIGHTNING AND THUNDER STROM.