Filter
Top Products
53
D-108 Owner’s Manual (Recording to a Metronome Sound)
5
Checking the metronome sound
1. Depress the DISP SEL key, then press the
EXECUTE/YES key to priory switch the time base
to BAR/BEAT/CLK.
2. Start playback from the beginning of the Program.
Even if the selected Program does not have any recorded
data, track 8 outputs the metronome sound and the D-
108 counts time.
3. Adjust the system so the sound output from track
8 can be monitored with the mixer.
You will hear the metronome sound output from track 8
using the Tempo Map created earlier.
4. After confirming the metronome sound, stop the
recorder section and return to the top Program.
Starting recording
10. Hold down the RECORD button and press the
PLAY button to start recording.
The READY track will go to the input monitor mode just
as when the recording level was adjusted. The time the
level that was actually adjusted with the mixer will be
recorded.
11. Play the musical instrument in time with the
metronome.
Adjusting monitor/record level of the
musical instrument
5. Press the RECORD TRACK select key of the track
to record the musical instrument on, and then put
that track in the READY mode.
6. Press the RECORD button.
The LED of the RECORD button will flash and the READY
track will go to the input monitor mode.
7. Press the PLAY button and playback the Program
from the top.
Only the READY track will go to the input monitor mode
(recording does not take place), and all other tracks will
be in the reproduction monitor mode, therefore track 8
plays back the metronome sound.
Quitting recording
12. Press the STOP button to stop the recorder.
Checking the recorded sound
13. Turn OFF the ready track RECORD TRACK select
key .
14. Locate the top of the Program and start playback.
Adjust and monitor the track playback sound recorded
on the mixer. Since the metronome function still remains
ON at this time, you can hear the metronome sound
during playback of the recorded sounds when you turn
up the track 8 monitor volume.
8. Play the musical instrument in time with the
metronome and adjust the recording level of the
track to be recorded on the mixer.
9. After adjusting the recording level, stop the
recorder and return to the top of the Program.
8 TRACK DIGITAL RECORDER
PREVIEW
ENVELOPE
LOCATE REC END
VARI PITCH
RECORD STOP PLAY REWIND F FWD
PUNCH LOCATE
REHEARSAL
TAKE
TIME BASE SEL
RECALLSTOREHOLD/
/NO
EXIT
/YES
EXECUTE
DISP SEL
REDOUNDOERASE
AUTO RTN
COPY MOVE PASTE
CLIPBOARD
AUTO RTN
OUTINAUTO PLAY
AUTO PUNCH
START OUTIN END
TC INLOCKED HD ACCESS
RECORD TRACK
1/9
2/10
3/11
4/12 5/13 6/14
7/15 8/16
PGM SEL
PUNCH
IN / OUT
LOCATE ABS 0
CLIPBOARD PLAY
AUTO
SHIFT
POWER
OPTICAL
6
10
2, 7
1
4, 9