Filter
Top Products
64
D-108 Owner’s Manual (Cue & Review Function)
44.1kHz
4
42
OL
0
30
24
18
12
9
6
3
∞
playback point
Digital scrubbing using the envelope function
4. Press the RECORD TRACK select key of the desired
record track to select another track.
[Please Wait!] will briefly appear and then go to the
envelope indication of the selected track. The following
example shows the case when the indication is switched
from track 4 to track 8.
You may perform digital scrubbing using the “Envelope Function” of the D-108 while the recorder section is
stopped. The envelope function allows digital scrubbing for each track recorded. The display will show the
envelope indication of the track selected.
8 TRACK DIGITAL RECORDER
PREVIEW
ENVELOPE
LOCATE REC END
VARI PITCH
RECORD STOP PLAY REWIND F FWD
PUNCH LOCATE
REHEARSAL
TAKE
TIME BASE SEL
RECALLSTOREHOLD/
/NO
EXIT
/YES
EXECUTE
DISP SEL
REDOUNDOERASE
AUTO RTN
COPY MOVE PASTE
CLIPBOARD
AUTO RTN
OUTINAUTO PLAY
AUTO PUNCH
START OUTIN END
TC INLOCKED HD ACCESS
RECORD TRACK
1/9
2/10
3/11
4/12 5/13 6/14
7/15 8/16
PGM SEL
PUNCH
IN / OUT
LOCATE ABS 0
CLIPBOARD PLAY
AUTO
SHIFT
POWER
OPTICAL
1. While the recorder section is stopped, depress the
STOP button and then press the RECORD TRACK
select key of the desired record track.
This turns ON the envelope function. The envelope
indication of the selected track will appear on the
display. The following example shows the indication of
track 4 envelope, after RECORD TRACK select key 4 is
pressed. At this time the recorder section is in the STILL
status (scrub mode is in still status) and the REWIND LED
and F FWD lights up.
2. You can use the JOG dial to digitally scrub the
performance of the track selected.
The envelope of the performance recorded on the track
variates in real-time. During forward direction scrub the
F FWD LED lights up, and during rewind direction scrub
the REWIND LED lights up.
3. Adjust the monitor sound of the selected track so
that it can be monitored on the mixer.
5. Press the STOP button to stop the envelope
function.
Doing so will turn OFF the envelope function. The D-108
will return to the time base indication prior to turning
the envelope function ON.
44.1kHz
4
42
OL
0
30
24
18
12
9
6
3
∞
44.1kHz
8
42
OL
0
30
24
18
12
9
6
3
∞
Track indication
playback point
4
1
2
5