Filter
Top Products
Model D2424LVmkII Quick Operation Guide
12
This recorder contains an internal clock function.
Upon finishing format of the current drive, set internal clock to the present time by procedure explained
below. Procedures below is explained on the assumption that current drive has been formatted, the program
head (ABS 0) is displayed and this recorder is on standby.
<Note>
Be sure the internal clock is setup to the correct year, month, day and present time.
The year, month, day and time are important data necessary for executing the "
Multiple Undo Function
" ex-
plained in the Reference Manual. For details on multiple undo function, refer to the Reference Manual.
Setup of the Internal Clock
1. Press the [SETUP] key while in the stop mode.
The recorder will enter the SETUP mode and
“Signature Set?” menu will be displayed.
2. Rotate Jog dial to display the “Date & Time Set?”
(“?” flashes) menu and press the [EXECUTE/YES]
key.
The recorder will change to display of hour,
minute, second, day and month in real time setup
at shipping the recorder from the plant.
Example is January 8, 8 hour, 28 minutes, 54
seconds).
3. Press the [EXECUTE/YES] key.
The date section will flash and enter in the editing
mode. The time display will change to indicating
hour/minute.
4. Move edit point with the Shuttle dial and
input the number with the Jog dial.
When the Shuttle dial is rotated CW, the edit point
will move in order of "day," "month," "year," "hour,"
"minute," but in reverse order when rotated CCW.
Numbers, etc. shown below can be entered at each
edit point.
<Note>
The "
second
" figures will start from 00 at the in-
stant the following is executed (Pressing the
[EX-
ECUTE/YES]
key). Press the
[EXECUTE/YES]
key
in reference to the time announcement.
5. Press the [EXECUTE/YES] key.
The recorder will be set to the time/month, day
that was input and continue to function as the
internal clock.
6. Exit from the SETUP mode by pressing the [EXIT/
NO] key or [STOP] button twice.
The recorder will change to the time base display
prior to entering the SETUP mode.
Flashing
Hour :00 ~ 23
Minute :00 ~ 59
Day :01 ~ 31
Month :January ~ December
Year :00 ~ 99
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
2322
21
20
19
18
17
1615141312
11
10
98765
4
3
2
1
CLOCK
INT
Flashing
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
2322
21
20
19
18
17
1615141312
11
10
98765
4
3
2
1
CLOCK
INT
Flashing
SMH
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
2322
21
20
19
18
17
1615141312
11
10
98765
4
3
2
1
CLOCK
INT
MH
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
24
∞
42
OL
0
30
24
18
12
9
6
3
2322
21
20
19
18
17
1615141312
11
10
98765
4
3
2
1
CLOCK
INT
SETUP