Filter
Top Products
Model D2424LVmkII Quick Operation Guide
24
Playback using the Vari-pitch function
Vari-pitch function procedures
4. Set the desired pitch data using the Jog dial.
Rotating the Jog dial enables you to hear changes in
playback speed. Rotating the Jog dial clockwise
increases the speed, and rotating it counter-clockwise
decreases the speed.
To continue the playback with the Vari Pitch
function on, press the [EXIT/NO] key. This recorder
exits Vari Pitch data edit mode, indicates the
previous Time Base display, and continues playing
with the Vari Pitch you just set.
5. To turn off Vari Pitch mode, press the [VARI PITCH]
key.
The VARI PITCH LED turns off, the Vari Pitch function
is cancelled, and this recorder resumes playback at
normal speed.
Initialize the recorder.
6. If you wish to play back data at the current Vari Pitch
again, press the [VARI PITCH] key to turn the LED on.
You can turn the Vari Pitch function on and off and
edit the pitch data while this recorder is playing or
stopped, but not during recording.
However, if the Vari Pitch function has already been
turned on and the pitch data was specified before
you started recording, this recorder will record using
the current Vari Pitch.
<Notes>
• Even if the pitch data is 0.0% (no speed
change), pressing the
[VARI PITCH]
key will
still turn on the VARI PITCH function.
The speed is not changed, but the Vari Pitch
is turned on.
• The Vari Pitch function is automatically
turned off under the following conditions:
1. You have turned off and on the power to this
recorder.
The pitch data will be reset to 0.0%.
2. You must press the [EXECUTE/YES] key while
holding down the [SHIFT] key to turn the
"SLAVE mode" on (the setting pitch data
remains).
3. You set "Digital In" of the SETUP mode to a
“Sync” mode ("SPDIF: Sync" or "adat: Sync")
and the recorder is locking to the external clock
from DIGITAL IN or WORD IN. In consequence,
“DIGITAL” and “EXT” indicators light in the
display.
This section explains how to change the playback speed of the recorder using the Vari Pitch function.
You can set the playback speed in the range of +6.0% to -6.0% in 0.1% increments.
The [VARI PITCH] key turns Vari Pitch mode on and off. When the function is turned on, the VARI PITCH LED
lights up. When the function is turned off, the LED turns off.
1. Press the [PLAY] button to play this recorder.
2. Press the [VARI PITCH] key.
The VARI PITCH key LED lights up on the display,
indicating that the Vari Pitch function is turned on.
3. Press the [SHIFT] key, then press the [VARI PITCH]
key.
The current pitch data flashes on the display,
indicating that you can change the pitch data now.
(The “%” mark flashes.)
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
24
∞
42
OL
0
30
24
18
12
9
6
3
2322
21
20
19
18
17
1615141312
11
10
98765
4
3
2
1
CLOCK
INT
POWER
HOLD
RECORD
STOP
PLAY
REW
F FWD
ALL INPUT
ALL READY
LOCATE REC END
VARI PITCH
PUNCH
LOCATE
REHEARSAL
TAKE
RECALL
STORE
EXIT/NO
EXECUTE/YES
PGM SEL
NEXT
PREV
UNDO/REDO
PREVIEW
EDIT SETUP
AUTO RTN
OUTIN
AUTO PLAY
START
OUTIN
END
17-24
ACCESS
9-16
1/9/17
2/10/18
3/11/19
4/12/20 5/13/21 6/14/22 7/15/23
8/16/24
FOOT SW
LOCATE ABS 0
CLIPBOARD PLAY
AUTO
TRACK SHIFT
SHIFT
DISP SEL
CHARACTER
TIME BASE SEL
P.EDIT
EJECT
ENVELOPE
CHASE
TC READY TC GEN M.UNDO
TRACK SHIFT
PREV TC
NEXT TC
RECORD TRACK
CLIPBOARD
AUTO PUNCH
AUTO RT N
LOCATE MEMORY
24bit
96kHz
OPTICAL
24TRACK DIGITAL RECORDER
1
4
3
2,3,5,6
Flashing