Fujitsu PDS4213W-H Flat Panel Television User Manual


 
E-6
HANDY TIPS
Images may become “burnt” into the screen phosphors if the screen is left on for extended periods. To ensure that the display has a
prolonged service life, be sure to use a screen saver. This will ensure the same image or pattern is not constantly displayed for long
periods. (See P. E-38–E-39.)
The display’s plasma display panel, which is built for maximum precision, provides more than 99.99% effective pixels. You may find,
however, that some pixels constantly remain lit or dimmed.
The display has a fan to prevent its internal temperature from rising.
The fan starts if the surrounding temperature or the internal temperature of the display exceeds a certain level. If the display is installed
improperly or installed in the wrong direction, the resulting internal temperature increase will cause the fan to operate.
Be careful with the air delivered by the fan. It may be very hot.
Contact your dealer if you find that the display does not seem to function properly when used with other audio-visual equipment.
You may need to move your display if it produces degraded images or noise due to electromagnetic radiation, or if the infrared remote
control does not function properly.
Images may not be displayed properly if you connect a non-standard PC to the RGB input terminal. In this case, contact your dealer
for more information.
The protective circuit, built into the display, automatically turns off the power if the display has a problem. In this case, you will see
that the power indicator lamp flashes red.
Warning
If the power indicator lamp flashes red, this signifies that the display has developed a problem. When this happens, be sure to remove the
power plug from the receptacle to prevent fire or electric shock. Then, check the display in accordance with the instructions given on P.
E-44, or contact your dealer.
Viewing the screen constantly for extended periods can strain your eyes. Be sure to stay at a proper distance (at least 1.5 m or 5 feet)
from the screen and to look occasionally away it while working.
Have the display inspected and cleaned by your dealer at regular intervals.