Filter
Top Products
E-21
EnglishDeutschEspañolFrançaisItalianoPortuguês
日 本 語
Póññêèé
中文
ADJUSTING THE PICTURE
• Picture-related items can be set and adjusted in the Picture Adjustment Screen. See BASIC PROCEDURE OF ADJUSTMENT MENU
OPERATIONS on page E-20 for the basic operation procedures.
Adjusting the Signal Contrast
Press F to increase the input signal contrast.
Press
E to reduce the input signal contrast.
Press < to store.
Adjusting the Drive Contrast
Press F to raise the display’s luminance level, and increase the contrast.
Press E to lower the display’s luminance level, and reduce the contrast.
Press < to store.
Adjusting the Brightness
Press F to increase the brightness.
Press E to reduce the brightness.
Press < to store.
Adjusting Color
Press F to darken the color.
Press E to lighten the color.
Press < to store.
Adjusting the Tint
Press F to change the tint to a more greenish color.
Press E to change the tint to a more purplish color.
Press < to store.
Adjusting the Sharpness
Press F to sharpen the Sharpness.
Press
E to soften the Sharpness.
Press
< to store.
Adjusting the Ambient Sensor
Automatically adjusts the Sharpness to an optimized level that matches the brightness of the surrounding area.
Each time
E or F is pressed, the setting is switched.
On
<
Off
Press
< to store.
Note
• The screen display disappears if there is no operation within approximately 60 seconds.
• Depending on the model or the optional devices, some of the functions may not be available.
• The adjustment range varies according to the display signals. Make adjustments to your preferred Sharpness within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
MHD01661-02_E.book 21 ページ ２００４年１２月２２日 水曜日 午後５時１５分