Fujitsu plasmavision Flat Panel Television User Manual


 
E-28
ADJUSTING AUDIO
You can make changes to all audio adjustment options in the AUDIO Menu. See Page E-20 for the basic operation procedures.
The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any
changes.
Adjusting Treble (Treble)
Press EF to make adjustments.
F: Stronger treble
E: Weaker treble
Press < to store.
Adjusting Bass (Bass)
Press EF to make adjustments.
F: Stronger bass
E: Weaker bass
Press
< to store.
Adjusting Volume Balance (Balance)
Press EF to make adjustments.
F: Shifts the volume balance towards the right.
E: Shifts the volume balance towards the left.
Press < to store.
Setting Loudness (Loudness)
Corrects the balance between bass and treble for easy listening even with weak volume.
Each time you press
E or F, one of the available choices appears in the following sequence:
On
<
Off
Press
< to store.
AUDIO Menu screen
Note
The screen display disappears if there is no operation within approximately 60 seconds.
Depending on the model or the optional devices, some of the functions may not be available.
The adjustment range varies according to the display signals. Make adjustments to your preferred Sharpness within the adjustment range.
Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
Audio Input menu will not be displayed when “No Audio” is selected. (See P. E-36.)
MHD01661-02_E.book 28 ページ 2004年12月22日 水曜日 午後5時15分