Fujitsu plasmavision Flat Panel Television User Manual


 
E-5
EnglishDeutschEspañolFrançaisItalianoPortuguês
日 本 語
Póññêèé
÷–Œƒ
/ I power switch
If this button is pressed when the power indicator lamp is off, the indicator lamp will light.
The power can be turned on and the standby mode selected by using the remote control or the control panel of the display.
If this button is pressed when the power indicator lamp is lit, the indicator lamp will go out.
*Power is still supplied to parts of the display even if the indicator lamp is off.
HDMI input terminal (VIDEO5 INPUT/HDMI) for the U model
Connect this terminal to the HDMI output terminal for DVD, etc.
RS-232C terminal (RS-232C)
This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC.
RGB1 input terminal (RGB1 INPUT/DVI-D) for the W/U/A models
Connect this terminal to the PC’s display (digital RGB) output terminal.
*The connection cable No.88741-8000 made by molex Inc. is recommanded.
DISPLAY SECTION – BACK AND BOTTOM PART
Bottom
Back
Note
The illustration of external appearance is for 42" model. Please acknowledge some differences in the actual product of other models.
MHD01695_E.book 5 ページ 2005年2月1日 火曜日 午後7時7分