Filter
Top Products
62
Changing the Setting menu
EN
Changing Video Out system
Setting TV system
1 In stop mode, press [SETUP].
2 Select “Advanced Setting Menu”
using [Cursor U / D], then press
[ENTER].
If it has already appeared, proceed to step 3.
3 Select “Playback” using
[Cursor U / D], then press [ENTER].
4 Select “Video Out” using
[Cursor U / D], then press [ENTER].
5 Press [ENTER].
6 Select the desired system setting
using [Cursor U / D], then press
[ENTER].
PAL: Outputs a modified PAL signal for viewing
discs recorded with the NTSC system on a
PAL system TV.
Auto: Changes the video system (PAL / NTSC)
automatically according to the format of
the inserted disc.
7 Press [SETUP] to exit.
Note
• With discs recorded using the PAL system, a PAL
signal is output for viewing on a PAL system TV.
• Discs recorded with the PAL system cannot be
viewed on an NTSC system TV.
• With discs recorded using the NTSC system, an
NTSC signal is output for viewing on an NTSC or
Multi system TV.
• With discs recorded using the NTSC system, select
PAL to view on a PAL system TV.
Auto
PAL
Video Out - TV System
Auto
PAL
DVD
DRV_B2737_B2734.book Page 62 Thursday, March 31, 2005 10:04 PM