FUNAI DRV-B2734 DVD VCR Combo User Manual


 
64
VCR functions
EN
Accidental erasure prevention
To prevent accidental recording on a recorded
cassette, remove its record tab. To record on it later,
cover the hole with cellophane tape.
One-touch timer recording
This feature allows you to set the recording length
simply by pressing [REC / OTR].
1 Turn on the unit and insert a
recordable tape.
Make sure that the TV input is set on the unit.
2 Press [VCR ].
3 Select the recording speed using
[REC SPEED] (See page 63.).
4 Select the desired channel to record
using [PROG. U / D] or [the Number
buttons].
5 Press [REC / OTR] repeatedly until
the desired recording time (30
minutes to 8 hours) appears on the
TV screen.
One-touch timer recording will start.
When the unit reaches the specified time, it will be
turned off automatically.
To change the recording length during one-touch
timer recording, press [REC / OTR] repeatedly until
the desired length appears.
To cancel one-touch timer recording within the
specified time, press [STOP S].
Hint
The remaining recording time will appear on the TV
screen during one-touch timer recording. Press
[DISPLAY] to see it on the TV screen.
Note
If VCR one-touch timer recording is completed
during DVD playback or recording, the VCR will be
in stop mode and the DVD keeps the current mode.
You cannot use the pause function during one-touch
timer recording.
When one-touch timer recording is finished and the
power is turned off, the unit will switch to the timer-
standby mode automatically if a timer recording has
been programmed. Press [T-SET] to cancel the
timer-standby mode to use the unit continuously.
Search
Index search
1 Press [VCR ].
2 During tape playback, press
[SEARCH] so that the index search
menu appears.
3 Enter the number of recordings you
wish to skip using
[the Number buttons] within 30
seconds.
4 Press [f] or [r] to start index
search.
If you want to go in the forward direction, press
[f].
If you want to go in the reverse direction, press
[r].
After index search, the VCR will play back the
tape automatically.
Note
Every time a tape is recorded, an index mark is
written on the tape.
Time search
This feature allows you to go to a specific point on a
tape by entering the exact amount of time you wish to
skip in order to reach the point.
1 Press [VCR ].
2 During tape playback, press
[SEARCH] repeatedly so that the
Time search menu appears.
3 Enter your desired time to skip using
[the Number buttons] within 30
seconds.
4 Press [f] or [r] to start time
search.
If you want to go in the forward direction, press
[f].
If you want to go in the reverse direction, press
[r].
After time search, the unit will play back the tape
automatically.
Note
These functions are not available during recording.
•Press [STOP S] to stop the search.
If the tape reaches the end during a Search, this unit
will cancel the search and rewind the tape.
Record tab
VCRVCR
0:30
8:00 7:30
1:00
(Normal Recording)
VCRVCR
VCRVCR
DRV_B2737_B2734.book Page 64 Thursday, March 31, 2005 10:04 PM