Filter
Top Products
13
EN
1A23
INITIAL SETUP (SETUP WIZARD)
INITIAL SETUPS
(SETUP WIZARD)
Initial Setup
Setup Wizard
When STB is turned on for the first time or before
completing autoscan, “SETUP WIZARD” is
displayed on the screen automatically. You can
complete the following items for the initial setups
through this menu.
1 Language for screen
2 Connection for audio output
3 Time zone
4 Daylight saving time (DST)
5 Display mode
6 Channel Scanning
1 Turn the TV on and select the input to
which the STB is connected.
2 Turn the STB on using [STANDBY-
ON]. “SETUP WIZARD” appears.
NOTE:
•
It takes about 8 seconds to display “SETUP
WIZARD” after turning the power on.
• “SETUP WIZARD” does not appear if the
autoscan has already been completed.
• You also can access “SETUP WIZARD” from
“INITIAL” in “SETUP” menu.
3 Select “CONTINUE” using [s / B], then
press [OK].
SETUP WIZARD
“CONTINUE”:
“CANCEL
”:
CONTINUE
CANCEL
To continue setup
To cancel to leave pre-arranged
setup
This SETUP WIZARD will help you with the initial
setup on your own.
4 Select the language using [K / L], then
press [OK].
SETUP WIZARD 1/6
Select the language for setup display.
Elija idioma de preparación.
Sélectionner langue écran config.
ESPAÑOL
ENGLISH
FRANÇAIS
5 Select the connection for audio output
using [s / B], then press [OK].
SETUP WIZARD 2/6
AUDIO OUT :
RF OUT
:
Connecting STB and TV via AUIDO
Cable
Connecting STB and TV via RF
Cable
AUDIO OUT
RF OUT
Select the connection for Audio output.
Select “AUDIO OUT” if...
- you are using the standard audio cable to connect
the STB to your TV.
Select “RF OUT” if...
- you are using the RF cable to connect the STB to
your TV.
6 Select your time zone using [K / L],
then press [OK].
Select Time Zone
ATLANTIC
CENTRAL
MOUNTAIN
PACIFIC
ALASKA
HAWAII
EASTERN
7 Select “ON” or “OFF” for Daylight
Saving Time (DST) using [s / B], then
press [OK].
Select Daylight Saving Time
NOTE:
2:00AM of the second Sunday in
March until 2:00AM of the first
Sunday in November.
OFFON
8 Select the desired display mode using
[K
/ L], then press [OK].
Select display mode.
ZOOM
FULL
LETTERBOX
X6040UD_Book.indb 13X6040UD_Book.indb 13 10/22/2007 5:09:13 PM10/22/2007 5:09:13 PM