Filter
Top Products
- 1 -
SPECIFICATIONS OF AD-100 A-D CONVERTER
General
The AD-100 A-D converter converts the gyro compass reading into digital coded bearing data
and display it on a 4 digit LED display.
The digital bearing output may be sent to navigation equipment such as radar, GPS navigator
and autopilot.
Specifications
1. Input Signal Gyro repeater signal (AC Synchro, DC Synchro or Step-by-Step) DIP
switch provided to select input signal.
2. Input Voltage AC Synchro Type --- 20VAC to 135VAC (Rotor)
20VAC to 135VAC (Stator)
50/60Hz, 400Hz or 500Hz
DC Synchro Type -- 20VDC to 100VDC (Rotor)
20VAC to 100VAC (Stator)
Step-by-Step --------- 20VDC to 100VDC
3. Power Consumption Less than 5W
4. Tracking Speed 30º/sec
5. Bearing Display 4 digit LED display
6. Data Output AD–10S format ----- Photo-coupler driver type, 4 digit BCD code,
MSB transmission order.
IEC61162-1 ---------- HDT, VHW
or NMEA0183 RS-485 level
Ver. 1.5/2.0/3.0 Baud rate 4800 and 38,400 bps
7. Output Ports AD–10S format ------- 6 ports
IEC61162-1 ----------- 1 port
or NMEA0183
Ver. 1.5/2.0/3.0
8. Data Transmission AD–10S format ------- Switchable between 25ms and 200ms.
Use 25ms for radar only.
IEC61162-1 ----------- Selectable among 25ms, 100ms, 200ms and 1s.
or NMEA0183 Note: For 25ms, 100ms or 200ms, only HDT is
output.
Ver. 1.5/2.0/3.0 The 25ms setting sets baud rate to 38,400 bps.
9. Color Cabinet ---------------- 2.5GY 5/1.5 Newtone No.5
Front Panel ----------- N3.0
Program Number
Program No. Version No.
645-1410 05