Filter
Top Products
Specifications
MS-TV190LED MS-TV220LED
Screen size, visible 19” Wide Screen LED 22” Wide Screen LED
Screen Format 16:9 16:9
Resolution 1366 x 768 Pixel 1920 x 1080 Pixel
Max. contrast ratio 1000:1 1000:1
Brightness (Typical) 250 cd/m2 250 cd/m2
Response Time (Typical) 5ms 5ms
Display Colours 16.7M 16.7M
Power Supply 110-240V AC, 12V DC 5 metre cable 110-240V AC, 12V DC 5 metre cable
Power Consumption 36W 48W
Standby Power Dissipation ≤1W ≤1W
Colour System PAL PAL
Sound System BG/DK/I BG/DK/I
AV Playback PAL/SECAM/NTSC PAL/SECAM/NTSC
Troubleshooting
PROBLEM SOLUTION
No picture or sound Check the power supply is plugged in and turned on.
Picture is OK but no sound Make sure the volume is not set to minimum or mute. Turn o the TV and turn back on.
Remote control doesn’t work Check the battery connection is correct. Check the batteries. Make sure no obstacles are between the sensor of the remote and TV
No TV Signal Check the source is set to ATV or DTV. Check the antenna signal status.
No external video signal Check the source is set to AV
Picture lacks colour or is to dark Check colour, brightness and contrast settings
All channels lose colour intermittently Check the antenna in case it is broken, disconnected or damaged.
Poor reception, loss of colour Check channel is tuned correctly
Diagonal stripes on picture Receiver may be aected by interference. e.g. nearby radio broadcasting transmitter or from another TV receiver.
Ghost images appear Antenna direction may have been changed by a storm or strong wind. Ghost images are caused from both the signal travelling
directly from the transmitter and a signal reected from a hill or large building. Direction of the antenna should be chosen to avoid
this situation.
USB media les don’t work FAT 32 formatted ash drive required. Reformat if required.
Time Shift and PVR don’t work FAT 32 formatted ash drive required. Reformat if required.
All Models Feature:
» Conformal coated PCB
» Built-in DVD/CD mechanism
» Built in DVB-T digital tuner
» HDMI input for true digital connection
» USB connection for digital media playback
» PVR functionality (record digital TV)**
» Component and Composite video inputs
» VGA port for connection to a PC
» Multi-language On-screen display
» Parental Lock
» Sleep Timer
» Built in speakers (4W x 2)
» Wall mounting bracket included
013
Important Safety Instructions
1. READ INSTRUCTIONS - All the safety and operating instructions should be read before the unit is
operated.
2. RETAIN INSTRUCTIONS - The safety and operating instructions should be retained for future
reference.
3. HEED WARNINGS - All warnings on the unit and in the operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS - All operating and use instructions should be followed.
5. CLEANING - Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning the exterior cabinet only.
6. ATTACHMENTS - The manufacturer of this unit does not make any recommendations for
attachments, as they may cause hazards.
7. WATER AND MOISTURE - Do not use this unit near water. For example, near a bathtub, washbowl,
kitchen sink, laundry tub, in a wet basement, or near a swimming pool.
8. ACCESSORIES - Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The unit
may fall, causing serious injury, and serious damage to the unit. An appliance and cart combination
should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the
appliance and cart combination to overturn.
PORTABLE CART WARNING
S3126A
9. VENTILATION - Slots and openings in the cabinet back or bottom are provided for ventilation, to
ensure reliable operation of the unit and to protect it from overheating. These openings should never
be blocked by placing the unit on a bed, sofa, rug, or other similar surface. This unit should never be
placed near or over a radiator or heat source. This unit should not be placed in a built-in installation,
such as a bookcase, or rack unless proper ventilation is provided or the manufacture’s instructions
have been adhered to.
10. POWER SOURCE - This unit should be operated only from the type of power source indicated on the
rating plate. If you are not sure of the type of power supply to your home, consult your appliance
dealer or local power company. For units intended to operate from battery power, or other sources,
refer to the operating instructions.
11. POLARIZATION - This unit is equipped with a polarized alternating current line plug (a plug having
one blade wider than the other). This plug will t into the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still
fails to t, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose
of the polarized plug.
12. POWER-CORD PROTECTION - Power supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them, paying particular attention to cords at
plugs, convenience receptacles, and the point where they exit from the appliance.
13. LIGHTNING - To protect your unit during a lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system.
This will prevent damage to the unit due to lightning and power line surges.
14. POWER LINES - An outside antenna system should not be located in the vicinity of overhead power
lines, or other electric light or power circuits, or where it can fall into such power lines or circuits.
When installing an outside antenna system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be fatal.
15. OVERLOADING - Do not overload wall outlets and extension cords as this can result in a risk of re
or electric shock.
16. OBJECT AND LIQUID ENTRY - Do not push objects through any openings in this unit as they may
touch dangerous voltage points or short out parts that could result in re or electric shock. Never
spill or spray any type of liquid into the unit.
17. OUTDOOR ANTENNA GROUNDING - If an outside antenna or cable system is connected to the unit,
be sure the antenna or cable system is grounded to provide some protection against voltage surges
and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA 70, provides
information with respect to proper grounding of the mast and supporting structure, grounding of
the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna
discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
18. SERVICING - Do not attempt to service this unit yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all servicing to qualied service personnel.
19 .DAMAGE REQUIRING SERVICE - Unplug this unit from the wall outlet and refer servicing to qualied
service personnel under the following conditions:
A. When the power-supply cord or plug is damaged.
B. If liquid has been spilled, or objects have fallen into the unit.
C. If the unit has been exposed to rain or water.
D. If the unit does not operate normally by following the operating instructions. Adjust only
those controls that are covered by the operating instructions, as an improper adjustment
of other controls may result in damage and will often require extensive work by a qualied
technician to restore the unit to Its normal operation.
E. If the unit has been dropped or the cabinet has been damaged.
F. When the unit exhibits a distinct change in performance, this indicates a need for service.
20. REPLACEMENT PARTS - When replacement parts are required, be sure the service technician uses
replacement parts specied by the manufacturer or those that have the same characteristics as the
original part. Unauthorized substitutions may result in re, electric shock or other hazards.
21. SAFETY CHECK - Upon completion of any service or repairs to this unit, ask the service technician to
perform safety checks to determine that the unit is in proper operating condition.
22. HEAT - The product should be situated away from heat sources such as radiators, heat registers,
stoves, or other products (including ampliers) that produce heat.
23. NOTE TO CATV SYSTEM INSTALLER - This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, In particular,
species that the cable ground shall be connected to the grounding system of the building, as close
to the point of cable entry as practical.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT
REMOVE COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Double insulation this is class II apparatus.
The mains plug used as the disconnect device. The disconnect device shall remain readily operable.
WARNING: To reduce the risk of electric shock do not expose this apparatus to rain or moisture and
objects lled with liquids, such as vases, should not be placed on this apparatus.
WARNING: According to the industrial standards, there are a certain number of defective pixels both
bright and dark that are acceptable. Although we produce panel with more than 99.99 percent active
cells, there still may be some cells that do not produce light or remain lit. For more information, please
contact sales or the technical support.
TV/CATV MODE SELECTION
When shipped from the factory, the TV/CATV menu option is set to the “TV” mode.
If using CATV, set the menu option to “CATV” (Cable Television)
WARNING: Do not leave any stationary images, patterns, PIP box, or letterbox images on the screen
for an extended period of time. Also, do not display the same stationary patterns frequently. This
may result in permanent ghost images on the display unit. This type of damage is not covered under
warranty. Examples of this type of situation can be but not limited to the following: side bar images,
stock market report bars, video game patterns, closed captioning, shopping channel logo, price
display, and letterbox black bars. To prevent this type of damage, display constant moving images
that ll the screen as often as possible.
CAUTION
Changes or modications not expressly approved by the party responsible for compliance
with the FCC Rules could void the use’s authority to operate this equipment.
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
ANTENNA LEAD
IN WIRE
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENT
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250. PART H)
NEC - NATIONAL ELECTRIC CODE
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE S2898A