Filter
Top Products
11
Using the Remote Control
Buttons
TRACKINGSLOW
MENU
SEARCH
7 8 9
4 5 6
1 2 3
0
INPUTDISPLAY
VOLUME CHANNELPREV CH
MUTE
REC•OTR F.ADV PAUSE
STOP
PLAY
F.FWDREW.
VCR 2TV•VCR
VCR 1TVOFF
CLEAR SPEED EDIT
PROG
TV
Turns on a compatible GE, RCA,
or ProScan TV and sets the
remote to control the TV.
See page 14.
Used with OFF button to turn on
compatible TV after TV button is
programmed. See page 14.
VCR1
Turns on a compatible GE, RCA,
or ProScan VCR and sets remote
to control the VCR.
VCR2
Turns on a compatible GE, RCA,
or ProScan VCR and sets remote
to control the VCR when it has
been setup. See page 13.
CHANNEL up or down
Selects next higher or lower
channel in the VCRÕs channel
memory.
CLEAR
Resets time counter to 0:00:00.
Allows you to change entries
when setting the clock or VCR for
a VCR Plus+ or timer recording.
DISPLAY
Shows VCR operating displays
on the TV screen.
Displays the time counter.
EDIT
Signals two properly connected
VCRs to begin copying a tape.
See page 31.
F.ADV (Frame Advance)
Lets you view one frame with
each press of the button when
tape is in stop-action pause.
F.FWD (Fast Forward)
Fast forwards the tape when the
VCR is stopped.
Searches the picture in forward
motion during playback.
INPUT
Turns the line input on or off.
LINE appears in the VCRÕs
display panel and VIDEO
appears on the TV screen.
Line input refers to the signal
coming from the component
connected to the audio/video
jacks on the back of the VCR.
MENU PROG
Displays the VCR MAIN MENU
on the TV screen.
Used to program the VCR.
Removes a menu from the
screen.
Numbers (0 through 9)
Select a channel up to 99 by
pressing two numbers.
Select a cable channel over 99 by
pressing and holding 1 until 1– –
appears on the screen. Then
press the other two numbers.
OFF
Turns off VCR when remote is set
to control the VCR.
Component Buttons
Press one of the buttons to set the remote to operate that component.
VCR Function Buttons
Press VCR1 (VCR2) to set remote to control the VCR to use the function
buttons.