Filter
Top Products
15
Playing a Tape
To play a tape
1. Turn on the TV and tune it to channel 3, 4, or TVÕs video input to see
the picture from the VCR.
2. Insert a tape in the VCR.
VCR automatically turns on. The cassette-in indicator lights, and
the VCR indicator lights if the Auto TV/VCR feature is set to ON. The
tape automatically begins playback if the safety tab on the cassette
has been removed and the Auto Play feature is turned on.
3. Press PLAY, if necessary. PLAY appears in the VCRÕs display panel.
4. Press TRACKING up or down to remove any streaks from the picture,
if necessary. Details are on page 17.
5. Press STOP.
6. Press REW.
End of Tape
The VCR automatically rewinds the tape if it reaches the end of the
tape during playback.
Power Off
If you press POWER while a tape is rewinding, the VCR turns off
automatically when it is completely rewound.
7. Press EJECT on the VCR to eject the tape once it is completely
rewound.
Using the Playback Features
Auto Play Feature
This feature lets you tell the VCR whether you want it to automatically start playing a tape that is
inserted with the safety tab removed.
1. Press MENU on the remote to see the VCR MAIN MENU on the TV
screen.
2. Press 5 to display the PREFERENCES menu.
3. Press 2 to select Auto Play: ON or OFF.
¥ Select ON to have a tape with its safety tab removed start playing
automatically.
¥ Select OFF if you do not want a tape with its safety tab removed
to start playing automatically.
CHANNEL
CHANNEL
TRACKING
INPUT
TV
• VCR
TRACKING
POWER EJECT
STOP
FWDREW
RECORD PAUSE
PLAY
Safety Tab
Playback
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Set Clock
4 Channels
5 Preferences
PREFERENCES
1 Remote Control: VCR1
2 Auto Play: ON
3 Auto TV/VCR: ON
4 Front Panel: AUTO
0 Exit