Filter
Top Products
26
Recording a Program
Recording While You’re Away (Timer Recording)
Select Cable Box Viewing Channel
If you have a cable box, follow the directions below.
1. Press MENU on the remote to display the VCR MAIN
MENU on the TV screen.
2. Press 4 to display CHANNELS menu.
3. Press 5 to display Cable Box Setup menu.
4. Select one of the three options:
1 ALL Channels
¥ Press 1 for ALL channels and then enter two
numbers for the output channel of your cable
box. (Valid numbers are 01-13.)
¥ Press CLEAR to correct an entry.
If you connected your cable box to the VCR
using the cable boxÕs AUDIO/VIDEO OUT jacks,
press INPUT on the VCR to select VIDEO IN
option.
• Press MENU PROG. A message appears which
will time out or press MENU PROG to return to
VCR MAIN MENU.
VCR will now automatically enter the output
channel of your cable box in the VCR Plus+ or
Timer Recordings menu.
2 Only SOME Channels
Skip this setup if your cable box is not required for
all channels.
¥ Press 2 for Only SOME channels.
¥ Press MENU to continue.
3 Cancel setup
¥ Press 3 to cancel the CABLE BOX SETUP
feature.
¥ Press MENU to continue.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Set Clock
4 Channels
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: ANTENNA
4 VCR Plus+ Channel List
5 Cable Box Setup
CABLE BOX SETUP
Do you use your cable
box to receive ALL
channels or only SOME
channels?
1 ALL channels
2 Only SOME channels
3 Cancel setup
CABLE BOX SETUP
On what channel does
the VCR receive signals
from the cable box?
(usually 3, 4 or Video)
--
Press 01-13 or INPUT
Press MENU to cancel
CABLE BOX SETUP
The feature works only
if the cable box is used
to receive ALL channels.
Consult your User's
Manual for assistance.
Press MENU to continue
CABLE BOX SETUP
The Cable Box Setup
was canceled.
The VCR will NOT control
the cable box channel
during timer recordings.
Press MENU to continue