Go-Video TW1730 Flat Panel Television User Manual


 
24
Memorizing Channels
Procedures for Using the TV
The LCD TV can memorize and store all available channels for both antenna and cable TV. After
the channels are memorized, use the TV CH+/– buttons to scan through them. This eliminates the
need to change channels using the number keys. There are three steps for memorizing channels:
1) Select a broadcast source; 2) Memorize channels (automatic); and 3) Add and/or Delete chan-
nels (manual).
Selecting the Broadcast Source
Before your television can begin memorizing channels, you must specify the type of signal source that
is connected to the TV (i.e., an antenna or a cable TV system).
Press the MENU button.
The OSD MENU is displayed.
Select CHANNEL SETUP using the
TV CH+/- buttons and then press the
VOL+ button.
Select ANTENNA using the
TV CH+/- buttons and then press the
VOL+ button.
Select TV for Antenna or CATV for
Cable TV using the TV CH+/- buttons.
If you are not sure which type of cable
system you have, contact your cable
company.